A dual boot installation alongside Windows is one of the best ways to try a new operating system, whether it is a newer version of Windows or a Linux distribution. With dual boot, every time we start the PC, we will get to choose which OS we want to load. However, before we begin a dual boot installation, it's a good idea to prepare Windows, to make sure the installation goes without a hitch.
- Boot Runner 1 6 – Dual Boot Startup Control Panel
- Boot Runner 1 6 – Dual Boot Startup Controller
- Boot Runner 1 6 – Dual Boot Startup Control Module
- Boot Runner 1 6 – Dual Boot Startup Controls
Unblock any international website, browse anonymously, and download movies and Mp3 with complete safety with CyberGhost, just for $2.75 per month:
Table of Contents
- How to prepare Windows for partitioning
- Disable Fast Startup (Windows 8.1 and Windows 10 only)
How-To Remove an OS from Windows Dual Boot Config Step-by-Step 1. Boot into the NON Windows 7 OS (original OS before you installed Windows 7 as a dual-boot). For most people, this would mean. Understanding the boot process in Windows can help a technician troubleshoot boot problems. Windows Boot Process To begin the boot process, turn on the computer. This is called a cold boot. 1) Go to ROMs section of the App. 2) Click on the ROM you want to boot to. You should see 'Switching ROM' message. After few seconds, you should see a report message saying that 'ROM successfully switched'. 3) Now just do a normal reboot of your device. It should boot to the ROM you have switched on step 2.
Create a full Windows backup
Dual boot installations are usually safe, but any work with partitions runs the risk that something could go wrong. That could potentially mean losing our original Windows installation, along with all the files and programs.
So, it's best to do a full Windows backup, as a precaution, using AOMEI Backupper or a similar imaging software.
Boot Runner 1 6 – Dual Boot Startup Control Panel
This way, should anything go wrong during the dual boot installation, we can restore the original Windows in just a few minutes, with all the files, programs, and settings at the time of the backup.
For the full procedure, step by step, check our detailed guide:
How to prepare Windows for partitioning
Unless we have a second hard drive to install the new operating system, we need to shrink the Windows partition for a dual boot installation, to make space for the new OS's partition or partitions.
Before we shrink the Windows partition, we must make sure there are no file system errors, and it is also a good idea to defrag our drive.
Prepare Windows 8.1 / Windows 10
On Windows 8.1 and Windows 10, we just need to right-click on the hard drive and select 'Properties'..
On the 'Tools' tab, we first run the 'Error checking' app.
Even if Windows claims we don't need to check a drive, we should do a scan, as a precaution.
The scan should only take a few seconds. If it takes longer than that, it means that the file system had more serious problems than Windows realized.
After a successful scan, and only if we have an HDD drive, it's a good idea to do a full optimization and defragmentation from the Tools tab.
The optimization feature is not available for Solid-State Drive (SSD) disks.
Prepare Windows 7
The choices to prepare Windows 7 are the same as in Windows 8.1 and Windows 10, but the names are slightly different.
So, again we right-click the drive we are interested in, and select 'Properties'.
We run the 'Error-checking' app on the 'Tools' tab.
The first option, 'Automatically fix file system errors is enough. The second option will scan the whole disk surface; for large disks, it can take hours.
Windows 8.1 and Windows 10 can do the scan live, but Windows 7 need to schedule the scan for the system partition.
On next reboot, the scan will take a few seconds, usually less than half a minute.
After that, we go back to the 'Tools' and select Defragmentation.
Windows 7 allows us to defragment an SSD, but we really shouldn't. Defragmentation has no advantages for SSD drives, and it does a lot of unnecessary writes, which shorten the disk's lifespan.
Partitioning
If we want to install a newer version of Windows on dual boot, such as Windows 10 Technical Preview, Windows installation won't allow us to shrink the current Windows partition, to make space for the new OS. We need to do it manually on our current version of Windows.
It's different with Linux distributions since most of them support automatic resizing of the Windows partition during the installation. Still, it's always safer to handle NTFS from within Windows. After all, Linux support of NTFS isn't exactly official, and some distributions don't support NTFS at all during the installation.
To create the partitions we need, we just press the Windows key + R and type:
On the disk management console, we right-click on the partition of our choice, and select 'Shrink Volume'.
For most Linux distributions, 15GB of space is more than enough for a dual boot configuration. So on the 'Enter the amount of space to shrink' we select 15*1024=15360MB.
To dual boot a newer version of Windows, we should give at least 50GB(51200MB) for a basic installation. Of course, it depends on how many programs we intend to install on the second OS.
For a Linux installation, it is also a good idea to create the three main Linux partitions: root '/', '/home', and swap, which is the equivalent of Virtual Memory in Windows.
So, we right-click the unallocated space, select 'New Simple Volume'..
..and give 10240MB (10GB) for root '/'.
We don't need to assign a drive letter or drive path. After all, it will be formatted to a Linux-only file system, such as Ext4, and Windows won't be able to read it anymore.
We also don't need to format the volume.
We repeat the procedure to create partitions for /home, where 4096MB is enough, and Swap, which will take the slightly less than 1GB left.
The last two partitions are of a different color because they are extended partitions, not primary. A disk with MBR partition style supports only four primary partitions, but up to 99 extended.
If we shrunk the Windows partition more than 15GB, we should give root '/' 10-15GB, swap 1-2GB, and the rest to the '/home' partition, which will contain all the files and application settings for every user.
Disable Fast Startup (Windows 8.1 and Windows 10 only)
Have you noticed that Windows 8.1 and Windows 10 have a lower boot time than Windows 7, on the same PC? This happens because of the fast startup.
When we shut down the newer versions of Windows, part of the system is hibernated, with specific system data written from the RAM to the hard drive.
The next time we boot Windows, the hibernated data is restored to RAM, shaving off a few seconds as opposed to cold boot.
The Fast Startup feature might be a smart idea to lower boot time, but it can create problems on dual boot. It could lead to data loss in Windows. Audioswitcher 2 99 5. So, we should disable it, just to be on the safe side.
How to disable Fast Start in Windows 8.1
To disable this feature in Windows 8.1, we just need to go to the start screen, and search for 'Power Options'.
There, we click on 'Choose what the power buttons do'.
To unlock the setting, we click on 'Change settings that are currently unavailable'..
and then we can uncheck the 'Turn on fast startup'.
How to disable Fast Start in Windows 10
Windows 10 have messed up with the system options, by having some options at the settings screen, some at the control panel, and some on both.
The fastest way to disable Fast Start is right-clicking on the start menu button, and selecting 'Power options'.
From there, we click on the 'Additional power settings' link.
After that, the procedure is identical to the one on Windows 8.1. We click on the 'Choose what the power button does' link..
To unlock the setting, we click on 'Change settings that are currently unavailable'..
and then we can uncheck the 'Turn on fast startup'.
I can't find the 'fast startup' option
Some systems with Windows 8.1 or Windows 10 will not have the fast startup option at all.
Those systems don't support fast startup, so there is no need to disable it.
Now, we are ready to install the other OS in dual boot
Whether it is Windows 10 Creators Update, an insider track of Windows, Ubuntu, Elementary OS, or any other Linux distribution, once we prepare Windows for the dual boot installation, there is a much lower chance that something could go wrong.
After having prepared our Windows installation for dual boot, downloading and created an installation medium for our second OS - be it Linux or Windows, it's just a matter of changing the boot order and beginning the new installation.
If you have any questions regarding dual boot or had any trouble with your installation, let us know in the comments below.
Support PCsteps
Do you want to support PCsteps, so we can post high quality articles throughout the week?
You can like our Facebook page, share this post with your friends, and select our affiliate links for your purchases on Amazon.com or Newegg.
If you prefer your purchases from China, we are affiliated with the largest international e-shops:
If you own Intel-based Macs, you can run OS X and Windows on one machine. In fact, it's been possible to run Windows on a Mac for some time — with agonizing limitations. Near-extinct Mac models were loaded with Virtual PC emulation software could do Windows, too, but the program was painfully slow. Even if you find an old copy of the software, it won't work with any current Macs.
Boot Camp software from Apple shook up the computing public upon its apocalyptic arrival in April 2006. Boot Camp graduated from beta, or near-finished, status with the arrival of Leopard. Boot Camp Assistant software is stored in the Utilities folder inside the Applications folder.
Boot Camp itself is free. You have to supply your own single-disc or downloadable full-install version of Windows; an upgrade disc won't cut it.
It's also important to note that you can use a 64-bit version of Windows, Windows 7 (Home Premium, Professional, or Ultimate), Windows 8, or Windows 8.1. Consult Apple support to see which Mac models are compatible with which versions of Windows. In its current incarnation, Boot Camp isn't compatible with 32-bit versions of Windows.
..and give 10240MB (10GB) for root '/'.
We don't need to assign a drive letter or drive path. After all, it will be formatted to a Linux-only file system, such as Ext4, and Windows won't be able to read it anymore.
We also don't need to format the volume.
We repeat the procedure to create partitions for /home, where 4096MB is enough, and Swap, which will take the slightly less than 1GB left.
The last two partitions are of a different color because they are extended partitions, not primary. A disk with MBR partition style supports only four primary partitions, but up to 99 extended.
If we shrunk the Windows partition more than 15GB, we should give root '/' 10-15GB, swap 1-2GB, and the rest to the '/home' partition, which will contain all the files and application settings for every user.
Disable Fast Startup (Windows 8.1 and Windows 10 only)
Have you noticed that Windows 8.1 and Windows 10 have a lower boot time than Windows 7, on the same PC? This happens because of the fast startup.
When we shut down the newer versions of Windows, part of the system is hibernated, with specific system data written from the RAM to the hard drive.
The next time we boot Windows, the hibernated data is restored to RAM, shaving off a few seconds as opposed to cold boot.
The Fast Startup feature might be a smart idea to lower boot time, but it can create problems on dual boot. It could lead to data loss in Windows. Audioswitcher 2 99 5. So, we should disable it, just to be on the safe side.
How to disable Fast Start in Windows 8.1
To disable this feature in Windows 8.1, we just need to go to the start screen, and search for 'Power Options'.
There, we click on 'Choose what the power buttons do'.
To unlock the setting, we click on 'Change settings that are currently unavailable'..
and then we can uncheck the 'Turn on fast startup'.
How to disable Fast Start in Windows 10
Windows 10 have messed up with the system options, by having some options at the settings screen, some at the control panel, and some on both.
The fastest way to disable Fast Start is right-clicking on the start menu button, and selecting 'Power options'.
From there, we click on the 'Additional power settings' link.
After that, the procedure is identical to the one on Windows 8.1. We click on the 'Choose what the power button does' link..
To unlock the setting, we click on 'Change settings that are currently unavailable'..
and then we can uncheck the 'Turn on fast startup'.
I can't find the 'fast startup' option
Some systems with Windows 8.1 or Windows 10 will not have the fast startup option at all.
Those systems don't support fast startup, so there is no need to disable it.
Now, we are ready to install the other OS in dual boot
Whether it is Windows 10 Creators Update, an insider track of Windows, Ubuntu, Elementary OS, or any other Linux distribution, once we prepare Windows for the dual boot installation, there is a much lower chance that something could go wrong.
After having prepared our Windows installation for dual boot, downloading and created an installation medium for our second OS - be it Linux or Windows, it's just a matter of changing the boot order and beginning the new installation.
If you have any questions regarding dual boot or had any trouble with your installation, let us know in the comments below.
Support PCsteps
Do you want to support PCsteps, so we can post high quality articles throughout the week?
You can like our Facebook page, share this post with your friends, and select our affiliate links for your purchases on Amazon.com or Newegg.
If you prefer your purchases from China, we are affiliated with the largest international e-shops:
If you own Intel-based Macs, you can run OS X and Windows on one machine. In fact, it's been possible to run Windows on a Mac for some time — with agonizing limitations. Near-extinct Mac models were loaded with Virtual PC emulation software could do Windows, too, but the program was painfully slow. Even if you find an old copy of the software, it won't work with any current Macs.
Boot Camp software from Apple shook up the computing public upon its apocalyptic arrival in April 2006. Boot Camp graduated from beta, or near-finished, status with the arrival of Leopard. Boot Camp Assistant software is stored in the Utilities folder inside the Applications folder.
Boot Camp itself is free. You have to supply your own single-disc or downloadable full-install version of Windows; an upgrade disc won't cut it.
It's also important to note that you can use a 64-bit version of Windows, Windows 7 (Home Premium, Professional, or Ultimate), Windows 8, or Windows 8.1. Consult Apple support to see which Mac models are compatible with which versions of Windows. In its current incarnation, Boot Camp isn't compatible with 32-bit versions of Windows.
Other requirements follow:
Boot Runner 1 6 – Dual Boot Startup Controller
An Intel Mac with OS X version 10.6 or later
At least 2GB of RAM and 20GB of available space on the Mac's storage drive that you want to donate to Windows
A blank CD or USB storage device that you'll use for Windows software drivers
If you don't run into snags, the entire installation should take about an hour.
Boot Runner 1 6 – Dual Boot Startup Control Module
Windows 8 and Windows 8.1 are optimized for a touchscreen environment, though you can use it with a standard mouse and keyboard. For now, Macs don't support touchscreen computing.
To install Windows 8 via Boot Camp, you still must have a legitimate Windows 8 license from Microsoft and a Win8 installation disc, assuming that you have an optical drive. If you don't have an optical drive, you may be able to create a Windows installer from an ISO file downloaded from Microsoft on a USB flash drive that's 8GB or larger.
Because snags are possible, back up all your important information on the Mac's startup disk.
Basic training
Following are the basic steps to get through Boot Camp:
Boot Runner 1 6 – Dual Boot Startup Controls
Run Boot Camp Assistant (in the Utilities folder inside the Applications folder) to make sure that you have the latest firmware on your computer and to install any support software from Apple that you might need. Sqlpro studio 1 0 153 – powerful database manager roles.
You'll find any updates at Apple support. If you're using a portable computer, make sure to connect the power adapter. You will also be given the option to create a Windows 7 (or later version) install disk for which you'll need a USB flash drive and an ISO image downloaded from Apple.
Follow the prompts in Boot Camp Assistant to create a partition for Windows.
You're essentially carving out an area of your hard drive for the Windows operating system,. This partition must be at least 30GB and can swell to the total free disk space on hand minus 30GB. If you don't plan on doing much in Windows, keep the partition small.
Drag the divider to set the partitions for both OS X and Windows, or click Divide Equally to make equal partitions. You can't resize a Windows partition after creating it, though you can replace it with a larger Windows partition.
If you have a Mac Pro with more than one internal hard drive, you can select which drive to partition. If any of this makes you nervous, know that you can remove the Windows partition later and go back to a single-partition Mac.
Insert the Windows CD or a USB flash drive with the Windows ISO file and then click Start Installation.
If you exited Boot Camp Assistant before installing Windows, open it again, choose Start the Windows Installer, and click Continue.
When you're asked to choose the Windows partition, select the partition that says BOOTCAMP.
You may have to scroll down to see it.
Don't erase any partitions that you see or create a new partition here. Failure to heed this warning could wipe out your entire Mac OS X startup disk.
(Optional) If you see a listing for Drive Options, click it; otherwise, proceed to Step 6.
Reformat the partition by using the Windows installer: Click Format.
You're using the reliable and secure NTFS file system, but you won't be able to save files to Windows from Mac OS X, at least not without a techie workaround.
Follow the onscreen instructions to finish installing Windows.
Boot Camp 5.1 includes several Mac drivers so that Windows will recognize your trackpad, Thunderbolt, USB 3.0, the iSight (or FaceTime) camera, the Eject key on the Mac keyboard, networking, audio, graphics, and so on.
A Boot Camp Control Panel for Windows and an Apple Boot Camp system-tray item will be added.
As with any new Windows computer, Microsoft requires that you activate your Windows software within 30 days.
Switching operating systems
Csimsoft trellis pro 16 5 45. You can go back and forth between OS X and Windows on your Mac, but you can't run both operating systems simultaneously under Boot Camp. Instead, you have to boot one operating system or the other — thus, the name Boot Camp.
Restart your Mac, and hold down the Option key until icons for each operating system appear onscreen. Highlight Windows or Macintosh HD, and click the arrow to launch the operating system of choice for this session.
If you want OS X or Windows to boot every time, choose app → System Preferences, click Startup Disk, and choose the OS you want to launch by default.
You can perform the same function in Windows by clicking the Boot Camp system-tray icon and selecting the Boot Camp Control Panel. Click either the Macintosh HD or Windows icon, depending on your startup preference.
